Stopping points from Theodore Francis Green Memorial State Airport to Seattle-Tacoma International Airport:

• Start from Theodore Francis Green Memorial State Airport
• 3 hours to Paterson, New Jersey after driving about 190 miles / 300 km
• 7.5 hours to Cleveland, Ohio after driving about 450 miles / 730 km
• 5 hours to Chicago, Illinois after driving about 340 miles / 550 km
• 6.5 hours to Minneapolis, Minnesota after driving about 410 miles / 660 km
• 3.5 hours to Fargo, North Dakota after driving about 240 miles / 380 km
• 4 hours to Dickinson, North Dakota after driving about 290 miles / 470 km
• 4.5 hours to Billings, Montana after driving about 320 miles / 510 km
• 5 hours to Missoula, Montana after driving about 350 miles / 560 km
• 7.5 hours to Seattle-Tacoma International Airport after driving about 480 miles / 770 km

Your total trip with all stops is around 3,070 miles / 4930 km, taking roughly 47 hours for the whole trip. If you want to see every small town along the way, you can get a full list of cities between PVD and SEA.

From:
City:	round-tripone-way
Check-in:
Check-out:
Get:	flighthotelcar rental      SEARCH

Get:	all calculations distance driving time driving distance flight time closest airport cost of driving time difference major cities halfway point stopping points fly or drive direct flights airlines serving hotels in the area currency converter latitude/longitude
From:
To:

• Providence to Seattle drive
• road conditions from Providence to Seattle
• flattest route from Providence to Seattle

Plan your road trip at  

Map of stopping points

More trip calculations

• Driving Distance
• Driving Time
• Cost Of Driving
• Halfway Point
• Distance
• Flight Time
• Time Difference

Stopping points from PVD to SEA

Start from Theodore Francis Green Memorial State Airport.

Paterson, New Jersey is stopping point #1 after driving about 190 miles (300 km) or 3 hours.

Cleveland, Ohio is stopping point #2 after driving about 450 miles (730 km) or 7.5 hours. Your total trip so far is about 640 miles or 1030 km over roughly 10.5 hours of driving.

Chicago, Illinois is stopping point #3 after driving about 340 miles (550 km) or 5 hours. Your total trip so far is about 980 miles or 1580 km over roughly 15.5 hours of driving.

Minneapolis, Minnesota is stopping point #4 after driving about 410 miles (660 km) or 6.5 hours. Your total trip so far is about 1,390 miles or 2240 km over roughly 22.5 hours of driving.

Fargo, North Dakota is stopping point #5 after driving about 240 miles (380 km) or 3.5 hours. Your total trip so far is about 1,630 miles or 2620 km over roughly 26 hours of driving.

Dickinson, North Dakota is stopping point #6 after driving about 290 miles (470 km) or 4 hours. Your total trip so far is about 1,920 miles or 3090 km over roughly 30 hours of driving.

Billings, Montana is stopping point #7 after driving about 320 miles (510 km) or 4.5 hours. Your total trip so far is about 2,240 miles or 3600 km over roughly 34.5 hours of driving.

Missoula, Montana is stopping point #8 after driving about 350 miles (560 km) or 5 hours. Your total trip so far is about 2,590 miles or 4160 km over roughly 39.5 hours of driving.

Finally, Seattle-Tacoma International Airport is your destination after driving about 480 miles (770 km) or 7.5 hours. Your total trip with all stops is around 3,070 miles or 4930 km, taking roughly 47 hours for the whole trip.

Stopping point calculator

Travelmath helps you figure out where to stop when planning a long road trip from one location to another. The best stopping point for an overnight hotel stay or a break from driving often depends on how far or how long you want to drive before pausing to rest. You can find the closest city to your stopping point to look for hotels, or explore other cities and towns along the route. Use this as a road trip planner when you're driving cross-country or mapping a route with multiple stops.